The SVS SB-2000 achieves a staggering 19-240 Hz frequency response from a compact, sealed enclosure weighing only 35 lbs. and measuring 14.2-inches all-around (without feet and grille). The subwoofer’s weight, compact footprint and understated but elegant appearance make moving and blending it into any listening environment a cinch, without sacrificing any of the power and slam we expect from massive subwoofers. No small performer, the SB-2000 matches or beats the output levels of subwoofers twice its size and weight. An all-new driver and amplifier, sealed cabinet and revised tuning unleash the SB-2000 to achieve levels of articulation, musicality, dynamics and fathomless extension unequaled in other compact powered subwoofers.

Commanding 12-Inch SVS High Output Driver

At the heart of the SVS SB-2000 subwoofer is a newly engineered 12-inch 2000-series driver with dual high-grade ferrite magnets and an FEA-optimised motor for nearly distortion-free performance, even at the most extreme drive levels. A reinforced Nomex spider was integrated for improved linearity and driver control, especially important when the STA-500D amp is pushing the driver to reference SPL playback levels. To ensure the SB-2000 can play its best long into the future, the driver also features a durable low-creep rubber long-throw surround and integrated tinsel leads to maximise longevity.

Powerful and Sophisticated Sledge STA-500D Amplifier

The SB-2000 Subwoofer’s Sledge STA-500D DSP amplifier boasts specs and features normally found in subwoofers costing two or three times as much. Conservatively rated at 500 watts RMS and 1,100+ watts peak dynamic power, the amp also has brains to match its brawn. A sophisticated DSP in the amplifier includes an array of filters and volume, gain, and phase controls for fine-tuning performance. The innovations don’t stop there though. A frequency-dependent limiter/compressor algorithm with adjustable attack/release and compression parameters offers the ultimate in refined behaviour at the drive limits of the subwoofer system.

Specs and Features

Frequency Response / Acoustic Data:

• 19-220 Hz +/- 3 dB
• Expect 2-3 Hz deeper extension in small to mid-size rooms.
• 2-meter ground plane away from reflective structures (quasi-anechoic)
• Roll-off slope optimised to take maximum advantage of available room gain

Subwoofer Specs:

• Premium black ash and piano black finish options
• Protective non-resonant steel mesh grille
• Front-firing 12" driver
• Rear-mounted amplifier
• Screw-in rubber feet
• Robust Medium Density Fiberboard (MDF) cabinet construction
• Cabinet Dimensions: 14.6" (H) x 14.2" (W) x 15.4" (D) (without grille)
• Overall Dimensions: 14.6" (H) x 14.2" (W) x 17.1" (D) (with grille)
• Weight (unboxed): 34.8 pounds
• Shipped Dimensions: 21" (H) x 20.2" (W) x 23.2" (D)
• Shipped Weight: 51 pounds

Driver Specs:

• SVS 12” 2000-series driver
• Powder-coated cast aluminum basket
• Dual high-grade ferrite magnets
• Finite Element Analysis (FEA)-optimized motor structure
• Dual shorting rings reduce gap induction and lower distortion
• Extended pole piece improves heat sink and thermal management properties
• 2” diameter, high-power voice coil
• Upgraded Nomex spider for improved linearity and driver control at extreme drive levels
• High-quality insulated tinsel leads with 3-point-contact precision alignment
• Lightweight aluminum cone with polypropylene dust cap provides excellent rigidity and pistonic behaviour
• Low-creep rubber long-throw surround for excellent durability and longevity

Amplifier Specs:

• Sledge STA-500D DSP amplifier
• 500 watts RMS continuous (1100 watts peak dynamic)
• Efficient and cool-running Class D topology
• DSP control for accurate response and refined behaviour under all operating conditions
• Main power rocker switch
• Auto-On / On toggle switch
• 3-12V trigger with 1/8” (3.5 mm) TRS mini-jack input
• Green standby mode with > 0.5 watts consumption
• Stereo line-level RCA Input & Output connections
• Input impedance – 47 kΩ (unbalanced line-level RCA)
• Continuously variable volume/gain control
• Continuously variable (0-180 degrees) phase control
• Continuously variable (50-160 Hz) 12 dB/octave low pass filter frequency with disable/LFE setting
• Fixed 80 Hz 12 dB/octave high pass filter on line level outputs
• RoHS compliant, lead-free construction and world-wide safety certifications
• Detachable power cord

FREE SHIPPING for all orders over $100
(TVs & Furniture, are free but to Brisbane metro only)

Orders are dispatched every Tuesday & Friday.
To avoid disappointment please finalise your order before 10am on these days.

* Some bulky items (23kg+) may incur a shipping surcharge if outside the Metro East Coast. We will contact you with a quote if so.